Arya Tose Mandegar Negin

you are here:
Articles

Disadvantages of plastics formed by injection molding and solutions to these disadvantages

In some cases, there are defects and problems in the injection molded plastic parts, each of which can be a defect or defect in the ...

Processing of Chlorinated Polyvinyl Chloride (CPVC) Resin

Plasticization is the key process in the fabrication of semi-finished and finished chlorinated polyvinyl chloride (CPVC) products. The quality of plasticization is directly related to ...

proccesing of polyamides (PA)

Polyamides can be processed by all common methods. However, low melting viscosity polyamides require special attention. Thanks to their crystalline structure, polyamides are easily injected and ...

Determine the melting point of rubber additives

Determining the range and starting melting of rubber additives: There are two test methods for determining the melting rate of rubber processing chemicals. 1. Use of ...

Types of polyamides and their applications

Nylon or polyamide popular types:  Nylon 66, 11, 12 and 46. These names come from the length of their polymer chains. The first number is the ...

Chlorineted PVC and it’s applications

Brief description of the material: Conceptually, CPVC is a PVC homopolymer exposed to a clearing reaction. Typically, chlorine and PVC react with the main free radical ...

what is the Polyvinylidene fluoride

Polyvinylidene fluoride Polyvinylidene fluoride or polyvinylidene difluoride (PVDF) is a highly non-reactive thermoplastic fluoropolymer produced by the polymerization of vinylidene difluoride. PVDF is a specialty plastic ...

The importance of drying engineering plastics

Drying and dehumidification is one of the main factors in improvement, especially engineering plastics. This type of material absorbs moisture during the production, transportation and ...

Properties, properties and application of plastics in everyday life

What is rubber? Plastic is a group of synthetic or semi-synthetic materials derived from the polymerization or polymerization process. Plastics are a class of incremental or ...